Evolved from the Bullet Buddy - Original / Acoustic; This new Bullet Buddy has been designed with hands free use specifically in mind. It is smaller than the Original Bullet Buddy and is more comfortable to use in a neck rack*. It omits the sound chamber and rear 'wha holes' of the Original Bullet Buddy's design so that the mic's element is brought as close as possible to the harmonica for maximum 'compression' of the sound.

It can still be used hand-held if you wish  or with the appropriate Ammo Clip** and also supports the same set of mic adapters that the other types of Bullet Buddy's use.

Please note that harmonicas, microphones & Ammo Clips pictured are for illustration only and are not included.

*The Bullet Buddy has been designed to fit the Konig & Meyer 14615 specifically. Other types of neck rack are not guaranteed to be suitable.

**The Bullet Buddy for 520/D112C, JT-30 & Bulletini fit the corresponding Ammo Clips. Used with a vocal mic (e.g. SM57 or SM58), the unit fits into a regular standard or large mic clip

® Bulletini is a registered trademark of BlowsMeAway Productions

Bullet Buddy 2.0

£50.00Price
Gauge
Mic Connector
  • Supported Harmonicas

    The Bullet Buddy comes in 2 variations a Wide-Gauge and a Narrow-Gauge

    The Narrow-Gauge version supports most major brands of 10 hole diatonic harmonica with standard metal coverplates. It has been designed and tested with the following models.

    • Hohner Special20
    • Hohner Rocket & rocket Amp
    • Hohner Marine Band (Crossover)
    • Lee Oskar / Tombo
    • Suzuki Manji

    The Wide-Gauge has its gripper set 1mm further appart thatn the Narrow-Gauge versionwhich it allows it to accomodate Seydal* harmonicas which are wide than most others in our experience. It has been designed and tested with the following models.

    • Seydel 1847
    • Seydel Session Steel

    Other types of diatonic harmonica such as the Lucky13 or the 6-hole BabyFat may also work but have not been tested by us.

    Unusual, funky and custom  harmonica designs such as the Yonberg or Turboharp, ore ones with custom coverplates such as Black Rock Harmonicas are not supported.

    * Please do not attempt to fit your Seydel harps into the Narrow-Gauge Bullet Buddy

    Supported Microphones

    • Shure 520 and 520DX (Green Bullet)
    • Superlux D112/C
    • Hohner Blues Blaster
    • Astatic JT-30
    • BlowsMeAway Productions Bulletini®
    • Shure Unidyne 515SA
    • Shure SM57
    • Shure SM58
    The different microphone adapters are interchangeable and can all be used with and of the various Bulley Buddy designs.
    To avoid confusion additional mic adapters are listed seperately. Please see the Bullet Buddy Mic Adapter page.
  • Facebook
  • Instagram
  • Pinterest

©2019 Battle Plan Harmonica